Hi Mark,
No this issue I've had is that the mate just won't start the generator
with usual symptoms of system shut down.
But when I go to the mate and press start, generator starts right up.
All setpoints are correct. Replace the mate, and all is good, again
same setpoints.
So I can only surmise the problem is a mate issue that I've yet to
track down, but have a fix.
jay
peltz power
On Dec 15, 2008, at 8:38 AM, Mark Dickson wrote:
Jay,
Funny you should mention this. A customer just called today to say
that his Mate has been failing to shut down his generator and they
have been walking into a smelly room full of boiling batteries each
time. Is this what you are referring to when the AGS’s are going bad?
I recently replaced an older Mate with this one that has the updated
firmware.
Mark Dickson
Oasis Montana Inc.
877-627-4778 toll-free
406-777-4321 (0830 fax)
www.oasismontana.com
www.grid-tie.com
www.PVsolarpumps.com
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org