Carl:
1. You have to use the one that matches the modules you are using.
2. The more connectors you have in a system, the more chance for
problems. We install a PVC J-box with panel mount connectors such that the
factory leads can reach without spicing or extending.
3. From the J-box, un-spliced building wire (usually THHN) is run through
conduit to the termination point.
See http://mpandc.com/practices/Technical_Procedures/PV_wiring/PV_wiring.html
William Miller
At 06:43 AM 12/16/2008, you wrote:
Hello All,
I'm trying to sort the module connector types being referenced here and there.
Can you help clarify
MC
MC4
Solarline 1
Solarline 2
Tyco
Preferences? Pros/Cons
Good source for crimp tools?
2009 regulations?
Thanks
Carl
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
