I have found that these washers are quite touchy about the receptacles that they are plugged into & the system's ground. Check if the washer is plugged into a GFIC & ck the bonding/grounds in the distribution panel & the grnd rod or rods. Sent via BlackBerry by AT&T
-----Original Message----- From: Bob-O Schultze <[email protected]> Date: Sun, 14 Jun 2009 16:35:25 To: RE-wrenches<[email protected]> Subject: Re: [RE-wrenches] DR>FX Compatibility Problem _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
