I've dropped my six year old Fluke 337 three times, once off a second story ladder onto a gravel driveway, and I'm still using it without ever sending it off for repair.
Daryl DeJoy NABCEP Certified PV installer Penobscot Solar Design > Don't know about the rest of you, but I can and eventually will drop > anything..... > > Bob > > On Tue, Jul 21, 2009 at 9:03 PM, Joel Davidson > <[email protected]>wrote: > >> Thank you all for the good advice. Is the Fluke 336 rugged? Can it be >> dropped? >> >> ----- Original Message ----- From: "Max Balchowsky" <[email protected]> >> To: "RE-wrenches" <[email protected]> >> Sent: Tuesday, July 21, 2009 10:02 AM >> Subject: Re: [RE-wrenches] Craftsman 82062 DC/AC Amp Clamp >> >> >> >> >>> Joel, the best "tool" Investment I ever made was my Fluke 336 (had it >>> for >>> years until someone wanted it bad enough to steal), I replaced it with >>> a 337 >>> and have a Mastech MS2138R as a back up, both have served me well...... >>> >>> Max Balchowsky >>> SEE Systems >>> Newport Beach, Ca.92662 >>> 760-403-6810 >>> >>> >>> >>> ----- Original Message ---- >>> From: Joel Davidson <[email protected]> >>> To: RE-wrenches <[email protected]> >>> Sent: Tuesday, July 21, 2009 7:40:34 AM >>> Subject: [RE-wrenches] Craftsman 82062 DC/AC Amp Clamp >>> >>> Wrenches, >>> >>> I really like my little Craftsman 82062 Multi-Meter with DC/AC Amp >>> Clamp >>> because it has a wide range, measures amps, volts, continuity, and low >>> price. It's a handy little all-in-one trouble-shooting tool - when it >>> works. >>> The trouble is it does not stand up to field use (cheap). I'm really >>> careful >>> (even have the original cheap plastic case in brand new condition) but >>> have >>> gone through 3 meters in a few years. Any recommendations for a small >>> multi-meter with a small DC amp clamp for getting into tight spaces? As >>> always, thank you very much for your advice. >>> >>> Joel Davidson >>> _______________________________________________ >>> List sponsored by Home Power magazine >>> >>> List Address: [email protected] >>> >>> Options & settings: >>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> List-Archive: >>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >>> >>> List rules & etiquette: >>> www.re-wrenches.org/etiquette.htm >>> >>> Check out participant bios: >>> www.members.re-wrenches.org >>> _______________________________________________ >>> List sponsored by Home Power magazine >>> >>> List Address: [email protected] >>> >>> Options & settings: >>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> List-Archive: >>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >>> >>> List rules & etiquette: >>> www.re-wrenches.org/etiquette.htm >>> >>> Check out participant bios: >>> www.members.re-wrenches.org >>> >>> >> _______________________________________________ >> List sponsored by Home Power magazine >> >> List Address: [email protected] >> >> Options & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out participant bios: >> www.members.re-wrenches.org >> >> > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
