Hello Wrenches,
There is a potential customer that purchased some equipment,
including a FW250 box, that goes on the end of the VFX inverter.
http://www.outbackpower.com/pdf/manuals/900-0060-1_REV_A.pdf
I've not installed one of these yet. Looking at the manual, it looks
extremely tight, especially on the DC side. Has anyone had
experience with these? Is there sufficient wire bending space?
Thanks,
Drake Chamberlin
Athens Electric
OH License 44810
CO License 3773
NABCEP TM Certified PV Installer
Office - 740-448-7328
Mobile - 740-856-9648
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
