Thanks Todd;
That was my point: I still install more Outback inverters and
controllers than anything else, its just frustrating to see a product
line supposedly move forward, when in reality it's harder to use.
I understand William's points as well, if we're doing a multiple
inverter system were still using Flex ware, it just should work better
than that, and cost less. It won't be long before another manu picks
this up and gives us what we need. I have two power boards being built
side by side, both dual Outback inverter systems, but one were NOT
doing the AC with Fware, and its going faster, and will be 100s of $$
cheaper.
Ray
On Oct 21, 2009, at 7:57 PM, [email protected] wrote:
Thanks for saying that Ray. I also have been a huge Outback fan but
have similar frustrations with why some problems have not been
addressed, after all these years. The single AC input on the GVFX
comes to mind.
Todd
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
