August,
Precisely. And it's a dumb idea, I know. But it's part of a utility-scale RFP, and it specifically calls out switching the DC input. This is too early a stage in the process to figure out better approaches; first we have to qualify for the job.

Surprisingly, Boltswitch makes one, and it's cheaper than SqD. So we may have found an answer, but I'm still listening for other ideas.
Thank you,
Allan

Allan Sindelar
Allan@positiveenergysolar.com
NABCEP Certified Photovoltaic Installer
EE98J Journeyman Electrician
Positive Energy, Inc.
3201 Calle Marie
Santa Fe, New Mexico 87507
505 424-1112
www.positiveenergysolar.com



August Goers wrote:
Allan -
 
What is the application? Are you trying to switch a large PV array before the inverter but after the strings have been fused and combined?
 
-August
 
August Goers
 
 
Luminalt Energy Corporation
O: 415.564.7652
M: 415.559.1525
F: 650.244.9167
 

From: [email protected] [[email protected]] On Behalf Of Allan Sindelar [[email protected]]
Sent: Monday, April 12, 2010 12:41 PM
To: RE-wrenches
Subject: [RE-wrenches] 600VDC Safety Switch question

Wrenches,
We need recommendation of a 200A or larger (400A or 600A preferred) two-pole or three-pole, double-throw, 600VDC rated, manually operated, load-break- and load-make-rated, service-equipment rated, fusible or nonfusible safety switch for purposes of switching DC input.

Square D 82345R and H82345 are rated only 250VDC in a fine-print note in their catalog.

I don't think that what I'm asking for exists, but wiser Wrenches may prevail. Can anyone suggest another brand and product model that meets these requirements?

Thank you,
Allan
--

Allan Sindelar
Allan@positiveenergysolar.com
NABCEP Certified Photovoltaic Installer
EE98J Journeyman Electrician
Positive Energy, Inc.
3201 Calle Marie
Santa Fe, New Mexico 87507
505 424-1112
www.positiveenergysolar.com

_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to