On 6/30/2011 8:35 PM, Nick Vida wrote:
Hi wrenches.
I had an interesting case today that I have been thinking about since
it happened. I dont have all the details because the homeownter had to
leave before I was done with the service call, but here is what I do
know. SB5000 with 2 strings of 15 modules. String one was 437 vdc, and
string 2 was 247vdc. I decided to look for a ground fault, and I
turned off the inverter. I measured for ground faults and found no
evidence of anything wrong in that regard. As the homeowner was out of
time and wanted me to go, I re-landed the wires in the dc disco, and
when I replaced the fuses, I noticed a minor arc when one of the fuses
was going it. Although I had no time to measure it, I think that there
might be a partial short circuit, possibly with one complete string
and some panels of the other string, and the remaining panels on the
second string. My mind was racing with how I could have measured for a
partial short circuit without seeing it as an arch. I can imagine such
a thing on a bigger system being a dramatic electrical event.
needless to say, I cant wait to get back there and go through the
signal path properly and find out what the electrician did. And of
course i realized that replacing the fuses in such a questionable
situation was probably not the best idea.
Do any of you have any thoughts on how one would measure for such a thing?
nick vida
I'd probably use a DC clamp on ammeter. Clamp on and measure the top
and bottom current of each string... What comes in ~should~ come out.
If it's much different on one end vs. the other end of one string, maybe
that string is conducting around the path somehow. Remember that
sometimes just turning the clamp around and measuring the opposite
polarity may measure slightly differently than the opposite polarity and
that zero calibration is usually necessary.
boB
??
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
