Many products out there. One way is to use a flashed/sealed utility service
entrance masthead. Works well if you can run the short distance from the array
to the masthead with the conductors off the roof.
<br><br><br>------- Original Message -------
On 9/10/2011 10:10 PM Jesse Dahl wrote:<br>All,
<br>
<br>What have people found to be the best way to get PV conductors off a metal roof? The last one I worked on I entered the building through the wall using LB's.
<br>
<br>Jesse
<br>
<br>Sent from my iPhone
<br>_______________________________________________
<br>List sponsored by Home Power magazine
<br>
<br>List Address: [email protected]
<br>
<br>Options & settings:
<br>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
<br>
<br>List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
<br>
<br>List rules & etiquette:
<br>www.re-wrenches.org/etiquette.htm
<br>
<br>Check out participant bios:
<br>www.members.re-wrenches.org
<br>
<br><br><br>Christopher Warfel, ENTECH Engineering, Inc.
PO Box 871, Block Island, RI 02807, 401-466-8978 (v)(f)
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
