It will be an s-5! attachment, but I was thinking of adding some EJOT to the 
array.  This array is located in a wide open spot on a very large body of water 
(Lake of the Woods).  When I did the initial survey it was VERY windy. The 
roofing is very well done and firmly attached, maybe I'm must making more work 
for myself.....

I've always just run across the roof and down the outside when doing things 
like this on residential work.  I'm drawn to the soladeck idea the most.

Jesse

Sent from my iPad!!!

On Sep 10, 2011, at 9:49 PM, "North Texas Renewable Energy Inc" 
<[email protected]> wrote:

> Both SolaDeck or a weatherhead will work, I've used both. But if the array
> is mounted to S5! clamps the roof owner may not want any penetrations. But
> then they will have to deal with an unsightly conduit running across the
> roof & around the eave.
> Jim Duncan
> 
> 
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]On Behalf Of Jesse
> Dahl
> Sent: Saturday, September 10, 2011 5:11 PM
> To: RE-wrenches
> Subject: [RE-wrenches] Leaving metal roofs?
> 
> 
> All,
> 
> What have people found to be the best way to get PV conductors off a metal
> roof?  The last one I worked on I entered the building through the wall
> using LB's.
> 
> Jesse
> 
> Sent from my iPhone
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: [email protected]
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
> 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: [email protected]
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to