Re: [RE-wrenches] Grounding DPW MPM.

Tue, 20 Sep 2011 20:40:11 -0700

Jesse,

I use a Wiley WEEB 9.5 bonding washers between each module and rail, a WEEB 6.7 lug on each rail, and a WEEB 6.7 on the pole.

Kent Osterberg
Blue Mountain Solar, Inc.


Jesse Dahl wrote:
Hello,
 
I have been looking at ground mount methods lately, specifically the DPW Multi-Pole-Mount setup and was wondering about the method used to ground the modules and racking.  How is this done? 
 
 
 
Thanks as always!
 
 
Jesse

_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

  
_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to