I have used both and like them, however they have been released too soon and
much of the features and software/firmware have not been developed yet. This
has been an ongoing "within the next month" chant for far too long now. The
good news is when these updates are ready you load them over the 'net but it
likely means a return trip to your customer to walk them through it. The worst
deficiencies at the moment are no Auto EQ (and a couple of my customers can
never recall the slightly complex manual process) and no Data Logging. There is
much more than this to come but these are the biggies in my book, especially
Data Logging. My favorite feature is the fact that a 150, 200 and 250Voc are
just that, then there is battery voltage head room on top of that before smoke.
This is very unlike most of the competition where 150Voc is really 145ish, and
200 is really 180. If you must have 200 or 250Voc then there is little choice
beyond the pricey Schneider 600Voc. From the Solar, Wind and Hydro powered
office of Jeff Oldham/Regenerative SOLutions
____________________________________________________________
57-Year-Old Mom Looks 25
Mom Reveals $5 Wrinkle Trick That Has Angered Doctors!
http://thirdpartyoffers.juno.com/TGL3131/4e8b921d8c2f9a30703st01vuc
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
