Hi Howie, They were most sensitive to peak volts, not rms.
My 2512 manual shows 14.7 as high bulk and 16.1 for eq. The 2624 should be double that. jay peltz power On Dec 1, 2011, at 9:05 PM, Howie Michaelson wrote: > Hi All, > > Does anyone know of a link to the old Trace 2624 inverter/Charger (the one > with the plexiglass front. I believe the model number was U2624, but I'm > not positive. I'm trying to remember what the maximum bulk voltage > setting was on it. Also wondering how sensitive to lower gennie voltage > output (113 vAC) the charger was. How much would that cut down on the > current output capacity? > > Thanks, > Howie > -- > Howie Michaelson > NABCEP Certified Solar PV Installer™ > > Catamount Solar, LLC > Renewable Energy Systems Sales and Service > VT Solar Electric & Hot Water Incentive Partner > http://www.CatamountSolar.com > 802-272-0004 > > > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
