Wrenches,I recently inspected a system I installed in 2010, because the owner
commented that it appeared the frost wasn't melting off of one particular
module as it was from the others. Turns out the module glass is shattered.
There are no obvious (that i can see) impact points, leading to the question...
Why did the glass shatter?
I don't want to just assume, but if there is no sign of impact, I'm wondering
if this could be a warranty issue? Frame expansion/contraction due to
temperature swing maybe?
Any experiences, thoughts or advice?
Module is a Sanyo HIT N215A01
Thanks,
benn kilburn
Construction Electrician (NOC7241) Solar Photovoltaic Systems
CertifiedCertificate # 0007S
DayStar Renewable Energy Inc. [email protected] HAVE A SUNNY DAY
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
