You will need to get a 1000 amp 100 mV shunt. I did just what you're
wanting to do on a 4 SW4048 inverter system once.
I built my own buss out of copper bar, but you might be able to double
up the Midnite buss on to the bigger shunt.
I then used paralleled 4/0 cables for the battery side of the shunt.
Ray Walters
On 10/15/2012 9:21 AM, jay peltz wrote:
Hi Mac
Check out midnight they have exactly what you need
Jay
Peltz power
Sent from my iPad
On Oct 15, 2012, at 5:24 AM, mac Lewis <maclew...@gmail.com
<mailto:maclew...@gmail.com>> wrote:
Hi Wrenches,
I am looking for a >500A DC rated DC bussing, one with a built in
shunt and one without. I'll need at least 4 terminals/bussbar that
will bolt on or land 4 ott cable. Does anyone know where I can find
something like this?
Thanks
--
Mac Lewis
*
"Yo solo sé que no sé nada." -Sócrates
*
_______________________________________________
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
