At 12:53 PM 1/16/2013, you wrote:
Finally got through to Outback. They said the GVFX could be wired with a genny line-side of the inverter in order for the genny to charge the batteries and that this configuration could potentially cause problems for the genny. The likelihood of the PV sending power to the generator is extremely small as the inverter needs to see 5 minutes of perfect power in addition to sensing a near full battery bank before it will attempt to "sell" power back to the AC source.
A few years back, in a similar situation, Outback Tech Support told me that if the inverter tried to sell to the generator, the voltage would go out of f tolerance and the Outback GVFX would disconnect.
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
