Heyco Sunbundler! Typos courtesy of my iPhone.
On Apr 11, 2013, at 8:52 PM, Aaron Mandelkorn <reoso...@gmail.com> wrote: > Just wondering what people like to use for supporting the trunk cable for the > enphase 215 inverters. WIth zipties going brittle after a couple of years > aluminum or steel options are what I am more interested in. I have seen some > installs with steel zipties but the sharp edge on them makes me wonder if > there is a chance of them cutting into the cable. I have used 3/8" one hole > conduit straps on each side of the trunk cable connector and although this > seems quite stout it gets expensive on larger systems. Any ideas about > products out there for supporting the trunk cable for the life of the system? > > Aaron Mandelkorn > NABCEP Certified PV Installer > Renewable Energy Outfitters > Box 65 Salida, CO. 81201 > (970)596-3744 > reoso...@gmail.com > www.reosolar.com > > > > > > > > > > > > > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org