Yes, have programmed many through webbox. As long as you can get that webbox communicating and access it via HTTP it will not matter if your mac or IBM. I am not sure if SMA's newer CD based webbox setup will work under mac. If you have an IBM laptop I'd bring it as it may simplify the initial config. Kevin
-----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Jeff Clearwater Sent: June 23, 2013 2:16 PM To: RE-wrenches Subject: Re: [RE-wrenches] Sunny Island Two-Wire Start Hey Carl Thanks, Anyone else configured the SI through the Webbox? Thanks, Jeff Carl Adams wrote: Ryan, If you can connect via your browser to the WebBox, you can set the SunnyBoy parameter from their, without the SMA Service Cable. We have done that. We have not configured the SI via the WebBox so let us know how that works out. Cheers Carl Adams SunRock Solar _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
