We have bezels laser cut out of 16 gauge steel with the breaker pattern. Then we do a rough cut in the enclosure using a jig saw and rivet the bezel on. Breakers attach directly to the bezel.
Alternatively, many enclosure supplies will punch whatever you want into an enclosure. It gets expensive and takes a while, however. -James Jefferson Jarvis APRS World, LLC http://www.aprsworld.com +1-507-454-2727 (this message was sent from my cell phone ... my apologies for any spelling errors) On Sep 25, 2013 1:08 PM, "Drake" <[email protected]> wrote: > Hello Wrenches, > > Has anyone come up with a good way to make clean breaker space knockouts > in an enclosure? > > Thanks, > > Drake > > Drake Chamberlin > *Athens Electric LLC > OH License 44810 > CO License 3773 > NABCEP Certified Solar PV Installer > 740-448-7328 > *http://athens-electric.com/ > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
