I just did this for my fish house. I drilled holes first to eat up most of the spot I wanted to remove and then used a jig saw. I filed the area after I was done. I looks good. I put a very thin bead of grey caulk around the edge to hide the spot that I "colored outside the line".
Sent from my iPhone On Sep 25, 2013, at 1:50 PM, Ray Walters <[email protected]> wrote: > I just did one with 32 tooth/ in. jig saw, then filed it to clean the edges. > Came out decent, but took about 20 minutes. > I would tape over as well to avoid scratches. > I know they make punches, but they're stupid expensive, and easy to break the > corners off. > R.Ray Walters > CTO, Solarray, Inc > Nabcep Certified PV Installer, > Licensed Master Electrician > Solar Design Engineer > 303 505-8760 > On 9/25/2013 12:06 PM, Drake wrote: >> Hello Wrenches, >> >> Has anyone come up with a good way to make clean breaker space knockouts in >> an enclosure? >> >> Thanks, >> >> Drake >> >> Drake Chamberlin >> Athens Electric LLC >> OH License 44810 >> CO License 3773 >> NABCEP Certified Solar PV Installer >> 740-448-7328 >> http://athens-electric.com/ >> >> >> >> >> _______________________________________________ >> List sponsored by Home Power magazine >> >> List Address: [email protected] >> >> Change email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out participant bios: >> www.members.re-wrenches.org >> > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
