Hi William Page 23 of the VFX manual states " will reset if short circuited, no fusing is required".
Jay Peltz power > On Dec 5, 2014, at 5:01 PM, "William Miller" <[email protected]> wrote: > > Jay: > > I suspect shorting the Aux leads will kill an FX inverter. We traced the Aux > PCB traces to the scorch marks on the control board, so it seemed pretty > clear we had tested the scenario. > > William > > > <image003.jpg> > Lic 773985 > millersolar.com > 805-438-5600 > > From: RE-wrenches [mailto:[email protected]] On > Behalf Of jay peltz > Sent: Friday, December 05, 2014 4:25 PM > To: RE-wrenches > Subject: Re: [RE-wrenches] Aux Output on Outback Devices > > Hi William > > Supposed to be. > I've tried them with too large of a relay and wouldn't work ( the relay that > is). Dead short would be the same. > > But i did have a VFX 3648 many years ago that had 48v on the aux output. > Stumped the hell out of outback. While talking to tech, they had me short the > aux wires, and poof 1 dead inverter. > > Jay > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
