Jay:
Is this true for an FX manufactured in 2003? What version manual is this from? Wm Gradient Cap_mini Lic 773985 <http://www.millersolar.com/> millersolar.com 805-438-5600 From: RE-wrenches [mailto:[email protected]] On Behalf Of jay peltz Sent: Friday, December 05, 2014 5:26 PM To: RE-wrenches Subject: Re: [RE-wrenches] Aux Output on Outback Devices Hi William Page 23 of the VFX manual states " will reset if short circuited, no fusing is required". Jay Peltz power On Dec 5, 2014, at 5:01 PM, "William Miller" <[email protected]> wrote: Jay: I suspect shorting the Aux leads will kill an FX inverter. We traced the Aux PCB traces to the scorch marks on the control board, so it seemed pretty clear we had tested the scenario. William <image003.jpg> Lic 773985 millersolar.com <http://www.millersolar.com/> 805-438-5600 From: RE-wrenches [mailto:[email protected]] On Behalf Of jay peltz Sent: Friday, December 05, 2014 4:25 PM To: RE-wrenches Subject: Re: [RE-wrenches] Aux Output on Outback Devices Hi William Supposed to be. I've tried them with too large of a relay and wouldn't work ( the relay that is). Dead short would be the same. But i did have a VFX 3648 many years ago that had 48v on the aux output. Stumped the hell out of outback. While talking to tech, they had me short the aux wires, and poof 1 dead inverter. Jay _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
