I am repairing and restoring a pair of poorly designed lithium-ion
battery bank that suffered over discharge, damaging many cells. After
cell replacement I need to perform a discharge test with a 10kW load to
verify the remaining capacity. The battery voltage is 105 volts @ 100%
SoC and 89.6 volts @ 0%
I would like advice on how I can create an economical 10kW load. Water
heating element? Wire wound resistors? Are there any GT inverters that
will operate at these voltages?
Thanks.
--
Larry Crutcher
Starlight Solar Power Systems
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org