Load banks are for rent, I am in the generator business and it is a common requirement to provide a load bank upon installation. http://www.comrent.com/Solutions/load-bank-rentals.html
On Tue, Mar 17, 2015 at 4:35 PM, Ray Walters <[email protected]> wrote: > Hi James; > > So couldn't Larry weld in rigid conduit fittings? Aren't they NPSM, or do > I have that wrong? I suppose the Zinc plating would make a messier weld and > possibly be poisonous.... > > Also to Chris Mason, I was not aware that load banks were available for > rent. That sounds like a good option to consider. Do you have a > recommendation on who rents those? > > 3rd response to Jarmo: do you have any pictures of the Li+ thermal > issues? Are we talking structure fire potential, or just destruction of > the batteries themselves? > Is this another reason not to use plywood battery boxes? > > R.Ray Walters > CTO, Solarray, Inc > Nabcep Certified PV Installer, > Licensed Master Electrician > Solar Design Engineer > 303 505-8760 > > > Note that water heater elements are NPSM (National Pipe Straight >> Mechanical) and not NPT. So you need that type of half coupling or "bung" >> to weld in. The vegi-oil people seem to have this sort of stuff as they >> build water heater elements into things. >> >> >> > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: http://www.mail-archive.com/[email protected]. > org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > -- Chris Mason NABCEP Certified Solar PV Installer™ Solar Design Engineer Generac Generators Industrial technician www.cometsolar.com <http://www.cometenergysystems.com> 264.235.5670 869.662.5670 Skype: netconcepts
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
