Wrenches, I'm curious what strategies you use to preheat a propane gen in cold climates. This is a large off-grid design in a sub-zero winter climate and ideal would be to turn on a block heater an hour or two in advance, then run the gen cycle. We plan to use either a Schneider XW or Outback Radian configuration (still very interested in which you'd use and why). We could set up a logic/relay system to first send the gen request to the heater for a while and then turn off and initiate a gen cycle but that would eliminate the ability for autostart on short notice. I've read of heat lamps on a thermostat, just wondering if you have seen other solutions.
Thanks! Gary _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
