I made one from the design that was in HomePower a few years back. Actually just in the process of rebuilding the wooden mod holder portion. It still has life left in it but I want to make a couple modifications. It has worked great for the past several years. As simple and cheap as it is, not sure if I'd spend the $ on a manufactured one?
Benn Kilburn SkyFire Energy Inc. 780-906-7807 > On Apr 29, 2015, at 3:31 PM, Lou Russo <russo....@gmail.com> wrote: > > Wrenches, > > Anybody out there using the GEDA Solarlift (or any other lift for that > matter)? If so what is your opinion of it? Setup time seems a little long, > but it could easily make up for it in safety and array installation time. Any > input is appreciated. > > Past Wrenches discussions only seem to talk about lifts in general. > > Aloha, > > Lou Russo > (440) 345 6762 > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org