[RE-wrenches] DC conductors in metallic raceway/conduit

[Christopher Warfel]

I was under the assumption that dc conductors could only be run inside a 
building when in metallic raceway/conduit (up to a readily accessible 
disconnect switch) .  The building being occupied/residence.    A 
contractor ran 5 feet of pvc from the wall penetration to the charge 
controller in a concrete block garage.  I don't see anything that allows 
this by what I find in the NEC. Has anyone have a reference that permits 
this?  Thank you for any assistance.


--
Christopher Warfel, President
ENTECH Engineering, Inc.
PO Box 871, Block Island, RI 02807
401-466-8978

<<attachment: cwarfel.vcf>>_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org