I thought the APT panels had Square D QOU breakers? Also Midnite makes
an adapter plate that lets you use a newer panel mount DC breaker in the
place of the old medium Heini breakers. Might not help there.
I added an MPPT controller to an APT center a couple years ago, and I
just added a small secondary breaker box, because I didn't have right
size QOU.
R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760
On 7/18/2015 10:36 AM, William Dorsett wrote:
Those were Eaton/Heinemann Breakers, and distributors can be found at
http://www.sourceesb.com/eatonheinemannproducts/distributors-and-vendors/.
Wish Ananda Power was still around.
Bill Dorsett
Manhattan, KS
-----Original Message-----
From: RE-wrenches [mailto:[email protected]] On
Behalf Of William Miller
Sent: Saturday, July 18, 2015 5:58 AM
To: RE-wrenches
Subject: [RE-wrenches] APT Beaker
Friends:
I am adding an MPPT charge controller to a functioning APT power center. I
need one breaker for the job. The breakers are like those used in the Trace
DC250 cabinets but surface mount. Where do I look for one of these, please?
Thank you very much.
William
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
