Hi: The Schneider Battery Monitor,
1. The battery monitor will operate independently and store battery information into a micro-SD card. This info can be accessed by plugging in a USB cord from your laptop to the BM. The data will show up as a new hard drive in your laptop and the files will be in EXCEL format. This can be done with any battery based system, indeed anything with a battery. 2. In order to access the data remotely through the WEB, you will need a COMBOX with Combox firmware rev 3.00 BN 707. A Combox and BM will give you the ability to configure the BM and collect and access battery data log info over the WEB. 3. In order to be able to setup and control the BM with the SCP, System Control Panel, you will need SCP firmware rev 2.01 BN 8 If you're using the BM on Schneider battery based equipment then, 4. For the generator start module, you will need AGS firmware rev 3.00 BN 2 5. For the MPPT-60 charge controller, you will need MPPT-60 firmware rev 1.07 BN 6 6. For the HV-MPPT-80 charge controller, you will need HV-MPPT-80 firmware rev 1.01 BN 1 It's ok to have older firmware in any of the devices, but you will have missing menus and functions such as the state of charge functions on the XW. JARMO _____________________________________________________________________________________ Jarmo Venalainen | Schneider Electric | Xantrex Brand | CANADA | Sales Application Engineer Phone: +604-422-2528 | Tech Support: 800-670-0707 | Mobile: +604-505-0291 Email: [email protected] | Site: www.Xantrex.com | Address: 3700 Gilmore Way, Burnaby, BC V5G4M1 *** Please consider the environment before printing this e-mail From: jay <[email protected]> To: RE-wrenches <[email protected]>, Date: 08/24/2015 09:19 PM Subject: [RE-wrenches] Schneider XW battery monitor Sent by: "RE-wrenches" <[email protected]> HI All, Does anybody know where to find what version firmware of the SCP/inverter/CC that the XW battery monitor needs to work with? I can’t seem to find that data. thanks jay _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. ______________________________________________________________________
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
