I would put it in Float mode and let it offset the grid. 
I don't think it would actually sell unless you select that from the grid use 
menu. 
If it's the SW, that is. 
Study the owners manual 

Jeremy Rodriguez 
Solar Installation And Design Expert 
All Solar, Inc.
1463 M St
Penrose Colorado 81240

Sent by Jeremy's iPhone. Sorry for typos and shorthand!

> On Feb 9, 2016, at 12:23 PM, Ray Walters <[email protected]> wrote:
> 
> Greetings Esteemed Wrenches;
> 
> I just received an interesting call from an owner of a late 1990s vintage GTB 
> system here in Colorado.  (Trace SW4048 I'm guessing) The tenants had 
> disconnected the grid for almost 2 years and lived in the house off grid.  
> They had also done many scary wiring "upgrades" using speaker wire out of the 
> main AC load center.
> The tenants are gone, the AC load center was cleaned up, and the owner wants 
> to reconnect the GT system, but the utility is not allowing it since they 
> were disconnected for 2 years.  I'm still trying to find out what the 
> requirements are, but I wanted to ping the list and see what experience 
> anyone had, and what requirements might be placed in this situation.
> It seems to me that this system should be grand fathered in and not be 
> required to meet more than 1999 NEC, but I've never dealt with this scenario 
> before.  Requiring this to meet 2014 NEC would be insane, and even meeting 
> 2008 NEC would be a deal killer, as the old SW inverters were not UL 1741 
> compliant.  (wasn't even around in 1998 I believe)
> My plan was to inspect the entire system, retorque connections, perform any 
> necessary repairs, and just confirm compliance with NEC 1999.  There would be 
> little point, if the utility or AHJ required compliance with a newer code 
> though.
> 
> Thanks as always for any assistance,
> 
> -- 
> R.Ray Walters
> CTO, Solarray, Inc
> Nabcep Certified PV Installer,
> Licensed Master Electrician
> Solar Design Engineer
> 303 505-8760
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: [email protected]
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://www.mail-archive.com/[email protected]/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/[email protected]/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to