Can you get a meter main with only one breaker and then get a distribution panel and put all all loads there
Sent via the Samsung Galaxy S™ III, an AT&T 4G LTE smartphone <div>-------- Original message --------</div><div>From: Gregory Seelhorst <[email protected]> </div><div>Date:02/17/2016 6:23 AM (GMT-10:00) </div><div>To: RE-wrenches <[email protected]> </div><div>Subject: [RE-wrenches] Optimal 200 or 225 Amp Square D MSP All-in-One meter for CT Clamps </div><div> </div>Wrenches - Does anyone know of a good spec for a 200 or 225A Square D Main Service Panel which has feeders between the meter and Main Disconnect and would be ideal for 150A CT clamps for monitoring whole house consumption? I'm finding most MSPs have a short, flat bus between the meter and Main Disconnect which requires the Rigowski Coil (requiring more expensive and unreliable hardware). Thank you for your help in advance. Regards, Greg Seelhorst NABCEP PV Installation Professional #092907-16
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
