Jason
Fear not, I have had two in the last year and they were fantastic. Sent out
new inverters as soon as I sent on the model and serial #'s. K-1 is not usually
fixable so they send out new or refurbed units.
Apparently it is caused by high voltage on the line side and after X # of
times the relay just locks open. Enjoy.
peter giroux
American Solar
----- Original Message -----
From: Jason Szumlanski
To: RE-wrenches
Sent: Tuesday, June 28, 2016 12:37 PM
Subject: [RE-wrenches] K1-Open Fault on SMA SB
I'm heading out on my first K1-Open fault code on a SMA inverter. Any tips
for diagnostic steps and likely outcome? I'm dreading the call to SMA based on
recent feedback about their customer support.
​Jason Szumlanski
------------------------------------------------------------------------------
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
