The XW should be limited to 3 inverters. I've been there twice. I think the issue has to do with four of those inverter transformers in parallel creating a large Inductive load that gets owned by the inductive load of the reef blower. I guess you could add prescribed AC capacitor to the reef blower and the issue goes away.
LEDs lights are likely large series strings of direct AC coupled voltage drop loads and any gap gets displayed. Thank you, Maverick > On Sep 12, 2016, at 4:16 PM, Kevin Pegg <[email protected]> wrote: > > Hello Wrenches, > > I Installed a 4 x XW+6848 system with 4,000 Ah UnigyII AGM battery bank in > the spring. New building site, cycle charging with generator presently until > next year for PV installation. > > Construction crew of ~15 has been running flawlessly off this system for 6 > months with every kind of power tool. 3 buildings serviced from a centralized > power shed. > > Homeowner adds a Black & Decker BV6000 leaf blower and problems arise. The > blower starts fine, but most of the LED lights in the facility will flash on > and off twice when the blower starts up. Not a flicker, but an off/on cycle > about 1s each. This behavior extends to other buildings that might be 500' > away. Works fine when running the generator in charge mode (therefore gen > powering loads directly). > > Testing this same leaf blower on my own single XW6048 system, with LED > lights, and cannot replicate the issue. Even a small 2kW mod sine inverter in > my service truck runs it fine. > > I will put a call into Schneider but am not holding breath for help there. > > Any ideas? > > Kevin > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
