I think Radians are redundant anyway, if you parallel the output they will keep going when one fails. Also, the 8KW are two x 4KW modules, both can function independently. I know this because we lost one at home and kept going until a replacement arrived.
On Thu, Jan 11, 2018 at 7:03 PM, jay <jay.pe...@gmail.com> wrote: > HI all, > > I’m doing a project with 2 radians in a redundant configuration. > Each one would go into a transfer switch to power the common load. > > I’m looking for a good, fast transfer switch. 30amp 120/240 is fine. > And maybe a mechanical feature as well. > Code isn’t an issue > Will be off grid, remote mexico. > > There is the Iota of course, but was just looking for options. > > thx in advance, > > jay > > peltz power > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches. > org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > -- Chris Mason NABCEP Certified Solar PV Installer™ Solar Design Engineer Generac Generators Industrial technician www.cometsolar.com <http://www.cometenergysystems.com> 264.235.5670 869.662.5670 Skype: netconcepts
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org