Some of my non-solar consulting involves test engineering for lithium
ion materials development. I'm no expert but I do get to work with folks
developing and testing cells and sit in on industry training and
conferences now and then. I would discourage trying the jump start
described here without direct guidance from the cell / battery
manufacturer and a properly operating BMS. Li-ion batteries can be much
less tolerant to over-charge and over-discharge than the lead acid we're
used to working with in the solar business. Li-ion batteries require a
strictly enforced minimum cutoff voltage. For example, the discharge
cutoff for one recent client's battery is spec'd at 2.5V per cell. There
can be damage to the anode If voltage falls below that. Also, if you try
the jump-start on compromised packs with no BMS, different cells will
charge at different rates due to differing internal resistance (one
function of BMS is cell balancing). Over-charging can result in
permanent capacity loss and also electrode damage. Depending on the
chemistry this sort of damage can increase the risk of thermal events.
I've heard that some BMS will prevent recharging if the minimum cell
voltage limit has been busted, but no first hand experience myself. If
you do a web search on "lithium ion damage over discharge" you'll see
plenty of discussion. I tried to find specs on the iCel system but
didn't find anything useful.
be careful,
Tom
--
Tom Ruscitti
Senior Engineer
Taitem Engineering, PC
110 S. Albany Street, Ithaca, NY 14850
Mobile: (607) 220-7022
www.taitem.com
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
