This product has been out now and maybe its doing a similar thing as this not available product B3?
http://connectder.com/products/ jay peltz power > On Feb 22, 2018, at 3:54 PM, Dana <d...@solarwork.com> wrote: > > Per my Master AC electrician, you do not have to arrange for a meter pull > with the utility. That to me is one less piece of brain damage to deal with. > I have not checked out the cost of a back fed breaker VS this item. > > ---------------------------------------------------------------------------- > Dana Orzel Great Solar Works, Inc. > C - 208.721.7003 d...@solarwork.com > <mailto:d...@solarwork.com> > Idaho Contractor - # 028765 Idaho PV # 028374 > NABCEP # 051112-136 www.solarwork.biz > <http://www.solarwork.biz/> > "Responsible Technologies for Responsible People since 1988" > P Please consider the environment before printing this email. > > > From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On > Behalf Of Lorenzo Ortiz > Sent: Thursday, February 22, 2018 1:10 PM > To: RE-wrenches <email@example.com> > Subject: Re: [RE-wrenches] B3 Bypass breaker > > How is this different/better/less expensive than just doing a supply side tap > using insulated connectors (NSI's)? > > From what I can tell, it only works on panels that are fed with wire > conductors from the meter not hard bussing, so why not just tap it? > > > > On Thu, Feb 22, 2018 at 7:20 AM, Sam Haraldson <s...@onsiteenergyinc.com > <mailto:s...@onsiteenergyinc.com>> wrote: >> On Wed, Feb 21, 2018 at 8:00 AM, Dana <d...@solarwork.com >> <mailto:d...@solarwork.com>> wrote: >>> Has anyone used the B3 buss-bar bypass breaker setup yet? www.qfe002.com >>> <http://www.qfe002.com/> >> >> At SPI this year I spoke with one of their reps briefly and they indicated >> that after many years of trying to get the product ready it was finally >> going to be in production. I have researched it no further than that >> however. >> >> - Sam >> >> >> -- >> Sam Haraldson, Installation Manager >> Office: 406.551.6135 <tel:(406)%20551-6135> >> s...@onsiteenergyinc.com <mailto:s...@onsiteenergyinc.com> >> onsiteenergyinc.com <http://onsiteenergyinc.com/> >> >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: REfirstname.lastname@example.org >> <mailto:REemail@example.com> >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org> >> >> List-Archive: >> http://firstname.lastname@example.org/maillist.html >> <http://email@example.com/maillist.html> >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> >> >> Check out or update participant bios: >> www.members.re-wrenches.org <http://www.members.re-wrenches.org/> >> > >
_______________________________________________ List sponsored by Redwood Alliance List Address: REfirstname.lastname@example.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://email@example.com/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org