Good Morning Wrenches,
I am required to keep the bare #6 copper from touching the aluminum frame work of a Array Technologies tracker where it is not mechanically connected by a pass-through ground clamp on a tracking array [dissimilar metals] and am looking for a lead on an insulated standoff or strap to hold the #6 bare copper as it passes from panel to panel and rail to rail. The plans examiner would accept pass through clamps & this is a worst case-spendy solution to this. I have searched the inquired at local electrical warehouse &on the internet and to no avail under "insulated strap" & "insulated cable standoff". Has anyone else encountered his & what did you use? Where did you source this strap? I remember seeing something like this in the fuzzy past & cannot recall where I saw it or what it was for. Thanks for any suggestions. ---------------------------------------------------------------------------- Dana Orzel Great Solar Works, Inc. C - 208.721.7003 [email protected] Idaho Contractor - # 028765 Idaho PV # 028374 NABCEP # 051112-136 www.solarwork.biz <http://www.solarwork.biz> "Responsible Technologies for Responsible People since 1988" P Please consider the environment before printing this email.
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
