Why is it #6? Usually the solar panels wire size determine Array Teks size for this wiring. What do they say please? --Dave
> How about an insulated loop clamp like this one: > https://www.fastenal.com/products/details/0216763 > > You can get them in stainless and they have the rubber grommet so it won't > touch the rack. > > On Wed, Apr 18, 2018 at 12:00 PM, Dana <d...@solarwork.com> wrote: > >> Good Morning Wrenches, >> >> >> >> I am required to keep the bare #6 copper from touching the aluminum >> frame >> work of a Array Technologies tracker where it is not mechanically >> connected >> by a pass-through ground clamp on a tracking array [dissimilar metals] >> and >> am looking for a lead on an insulated standoff or strap to hold the #6 >> bare >> copper as it passes from panel to panel and rail to rail. The plans >> examiner would accept pass through clamps & this is a worst case-spendy >> solution to this. >> >> >> >> I have searched the inquired at local electrical warehouse &on the >> internet and to no avail under âinsulated strapâ & âinsulated >> cable >> standoffâ. >> >> >> >> Has anyone else encountered his & what did you use? Where did you source >> this strap? >> >> >> >> I remember seeing something like this in the fuzzy past & cannot recall >> where I saw it or what it was for. >> >> >> >> Thanks for any suggestions. >> >> >> >> ------------------------------------------------------------ >> ---------------- >> >> Dana Orzel Great Solar Works, Inc. >> >> *C - 208.721.7003 d...@solarwork.com >> <d...@solarwork.com>* >> >> Idaho Contractor - # 028765 Idaho PV # 028374 >> >> NABCEP # 051112-136 www.solarwork.biz >> >> *"Responsible Technologies for Responsible People since 1988" * >> >> *P* Please consider the environment before printing this email. >> >> >> >> >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches. >> org/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org >> >> >> > > > -- > *Will White* > Curriculum Developer > > [image: Inline image 3] > > e: w...@solarenergy.org > w: www.solarenergy.org > p: 802-272-3092 > > PV Installation Professional > # 093006-34 > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ e-mail offgridso...@sti.net text 209 813 0060 _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org