Fellow wrenches,
Am I missing something? Other than the way the sensor connects to the
inverter/CC/??? is this not simply a thermistor/other discrete
component with the appropriate output? Yes, it is potted for
preservation in the potentially acid vapor environment, and provided
with glue when the attachment is other than the terminal and again,
the connector is specific to each manufacturer.
Thanks for your input,
Bill LoeschSolar 1Saint Louis, MO314 631 1094
-----------------------------------------From: "Chris Schaefer"
To: "re-wrenches"
Cc:
Sent: Saturday August 4 2018 4:04:47PM
Subject: [RE-wrenches] battery temp sensors for older Trace/Xantrex
inverters
Good Day All,
Running into a lot of missing or chewed up battery temp sensors for
the older Trace inverters. I'm looking for potential replacements.
Anyone had any luck using another vendor or do you have a direct
replacement source for these?
Thanks, Christopher-
Chris Schaefer’s
[1]
Tel/Fax 585-229-2083 or Cell 585-748-1870
5115 South Hill Road ~ Canandaigua New York 14424
_www.solarandwindfx.com [2] ~ E-mail: [email protected] [3]_
Thomas Jefferson, the author of our great Constitution, once said,
"democracy" will cease to exist when you take away from those who are
willing to work and give to those who would not."
Links:
------
[1] http://mail2.spectrum.net/http:www.solarandwindfx.com
[2] http://www.solarandwindfx.com
[3] mailto:[email protected]
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
