And make sure that both ends of the Xanbus network are properly terminated.
Brad On Fri, Feb 1, 2019 at 8:44 AM Sandra Herrera < sandra.herr...@schneider-electric.com> wrote: > Hello Drake. > > In the Xanbus network, you have devices with power such as inverters, and > other devices without power. > > You can not connect an SCP directly to an MPPT60, because both SCP and > MPPT60 have no power, but if you have an inverter in the network, it should > give sufficient power for the devices. > > There are several reasons why a device that is still fully functional but > not show up on the network. This ranges from the minor CAT5 cable problem > to maybe a damage communication card. Some may be solved with a simple > factory reset, and other cases may require a replacement. > > However, without the full context of the conversation, I do not see how > connecting ComBox or SCP will make any difference. Although, the ComBox as > an AC power supply it will not power the Xanbus network, it is only to > power the ComBox. > > As far as connecting ComBox directly to your laptop without a router, this > is possible, but you need to change your network setting on the laptop. > > Sandra > > sandra.herr...@schneider-electric.com > > > > > > > > *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On > Behalf Of *drake.chamber...@redwoodalliance.org > *Sent:* Friday, February 1, 2019 8:28 AM > *To:* RE-wrenches <re-wrenches@lists.re-wrenches.org> > *Subject:* [RE-wrenches] No Communication to XW CC > > > > [External email: Use caution with links and attachments] > ------------------------------ > > > > Hello Wrenches, > > > > We have a situation on a repair job (that I didn't install), where the > charge controllers are not showing up on the SCP. There are 3 charge > controllers, two 600 V and one 150 volt units. There is a ComBox and and > SCP. > > > > One Schneider tech recommended that I unplug the SCP and plug a laptop > directly into the ComBox..The manual shows a router being used. > > > > Can a laptop be plugged directly in to a ComBox? Will this be helpful in > finding the missing CCs? > > > > Even with new Ethernet cables, the CCs don't show up. > > > > Thanks, > > > > Drake > > > > > ______________________________________________________________________ > This email has been scanned by the Symantec Email Security.cloud service. > ______________________________________________________________________ > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
