Jason
Last year we installed a system on a quonset hut structure. Used a clamp
from S-5 ( Protea bracket I believe ) and Iron ridge x-100 rails. Between the
brackets, self-tapping screws from Tringle and the rail it was amazingly strong.
peter
From: RE-wrenches <[email protected]> On Behalf Of
Jason Szumlanski
Sent: Thursday, February 7, 2019 9:06 AM
To: RE-wrenches <[email protected]>
Subject: [RE-wrenches] Curved solar mounting
Hi all,
I'm looking for some ideas for attaching modules to a curved carport system. I
attached a concept drawing. I'm pretty dead-set on through bolting to the
frames, but bottom clips would probably work if using an off-the-shelf rail
system. Any products or picture you can supply would be very helpful.
The uprights pictured are already determined. It's a 20' radius curve. I'm
assuming it will be steel tube bent to that radius. The total length will be
much longer than what is pictured. The general contractor is willing to
entertain any welded or bolted solution for the structure.
Thanks!
Jason Szumlanski
Florida Solar Design Group
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
