We've been having good luck with SImpliphi, the pricing has recently
gotten much more competitive. As it's names states, its simple. Each
3.8 kWh unit has an 80 amp breaker built into the top, weigh about 75
lbs, and are a bit smaller than an L16 but with carry handles. We use
an insulated 2 pole combiner block to run all the parallel conductors to
the main 2/0 cable. No monitoring, but they do have an handy setup
guide with recommended settings, specific for each manufacturer
(including Outback).
Note to all: Schneider XW can still not set its LVD above 48, which
basically makes it incompatible with most Li+ batteries. Their tech
support has been abysmal as well. We're looking forward to them as one
of the larger companies in the business, to put additional resources
into their engineering, and come out with at least a firmware update to
correct this problem.
Ray Walters
Remote Solar
303 505-8760
On 3/20/20 3:59 PM, David Katz wrote:
Hello Wrenches,
I am working with some people that want to use a 20 kw-hour to 30
kw-hour 48 volt lithium-ion battery with an Outback Radian and Outback
FM charge controllers.
They are considering using Discover, Blue-Ion, Battle Born or
SimpliPhi batteries.
Does any one have any recommendations of which battery functions best
with the Outback system.
Thanks,
David Katz
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
