Hi Jason. I just reviewed the assembly document and it does list in the notes wire specifications. It does not say only for emphase wire.
If your wire meets those specs I think your good to go. Jay Peltz power. > On Oct 10, 2020, at 7:29 AM, Jason Szumlanski > <[email protected]> wrote: > > > But is this compatible with Enphase field wireables? > > I know Enphase type DG cable is built on the TC-ER specs, but would it be a > listing violation to use TC-ER with the connectors? > > > >> On Thu, Oct 8, 2020 at 2:55 PM Bryan Norkunas <[email protected]> wrote: >> TC-ER is the way to go, easily found in stock all over the country and much >> less in cost than the Q-Cable >> >> >> >> >> >> Bryan Norkunas >> >> PV-Cables Inc. >> >> 989 Milton Ave Ste 1D >> >> Ferndale CA 95536 >> >> (707) 923-3000 office >> >> www.pv-cables.com >> >> >> >> >> >> >> >> >> >> >> >> From: RE-wrenches [mailto:[email protected]] On >> Behalf Of Jason Szumlanski >> Sent: Thursday, October 8, 2020 2:50 AM >> To: RE-wrenches >> Subject: Re: [RE-wrenches] Enphase Raw Q Cable >> >> >> >> I was thinking TC-ER. I would need a quick, easy, low cost way to transition >> from the Q Cable to the TC-ER. I'm pretty sure the Enphase field wireable >> connectors are not compatible with TC-ER, but I could be wrong. >> >> >> >> >> >> On Wed, Oct 7, 2020, 6:37 PM Bryan Norkunas <[email protected]> wrote: >> >> 12/2 flat tray cable? >> >> >> >> Bryan Norkunas >> >> PV-Cables Inc. >> >> 989 Milton Ave Ste 1D >> >> Ferndale CA 95536 >> >> (707) 923-3000 office >> >> www.pv-cables.com >> >> >> >> >> >> >> >> From: RE-wrenches [mailto:[email protected]] On >> Behalf Of William Miller >> Sent: Wednesday, October 7, 2020 9:42 AM >> To: RE-wrenches >> Subject: Re: [RE-wrenches] Enphase Raw Q Cable >> >> >> >> Put your junction boxes closer to the microinverters? >> >> >> >> Miller Solar >> >> 17395 Oak Road, Atascadero, CA 93422 >> >> 805-438-5600 >> >> www.millersolar.com >> >> CA Lic. 773985 >> >> >> >> >> >> From: RE-wrenches [mailto:[email protected]] On >> Behalf Of Jason Szumlanski >> Sent: Tuesday, October 6, 2020 9:08 AM >> To: RE-wrenches >> Subject: [RE-wrenches] Enphase Raw Q Cable >> >> >> >> Has anybody come up with a good wiring alternative to Raw Q Cable when >> making long runs along rails from a string to a junction box? >> >> >> >> We are running into supply problems through distribution. I'm looking for >> something that might be more readily available. >> >> >> >> Jason Szumlanski >> >> Florida Solar Design Group >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/[email protected]/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/[email protected]/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
