I'm learning that manufacturers data sheets state that 2-conductor Type TC cable is not -ER rated. I don't think that is going to work. I'm not sure how Enphase gets around that with their Type DG cable, which they state is built on the TC-ER standard, but it only has two conductors.
On Sat, Oct 10, 2020, 10:22 AM Jay <[email protected]> wrote: > Hi Jason. > > I just reviewed the assembly document and it does list in the notes wire > specifications. It does not say only for emphase wire. > > If your wire meets those specs I think your good to go. > > Jay > > Peltz power. > > On Oct 10, 2020, at 7:29 AM, Jason Szumlanski < > [email protected]> wrote: > > > But is this compatible with Enphase field wireables? > > I know Enphase type DG cable is built on the TC-ER specs, but would it be > a listing violation to use TC-ER with the connectors? > > > > On Thu, Oct 8, 2020 at 2:55 PM Bryan Norkunas <[email protected]> wrote: > >> TC-ER is the way to go, easily found in stock all over the country and >> much less in cost than the Q-Cable >> >> >> >> >> >> *Bryan Norkunas* >> >> *PV-Cables Inc. * >> >> *989 Milton Ave Ste 1D* >> >> *Ferndale CA 95536* >> >> (707) 923-3000 office >> >> www.pv-cables.com >> <https://mailtrack.io/trace/link/1a70300bcf6c92dda79f16f14899558929083c9b?url=http%3A%2F%2Fwww.pv-cables.com%2F&userId=1613865&signature=8d4fe9689f54f1c1> >> >> >> >> >> >> >> >> >> >> >> >> *From:* RE-wrenches [mailto:[email protected]] *On >> Behalf Of *Jason Szumlanski >> *Sent:* Thursday, October 8, 2020 2:50 AM >> *To:* RE-wrenches >> *Subject:* Re: [RE-wrenches] Enphase Raw Q Cable >> >> >> >> I was thinking TC-ER. I would need a quick, easy, low cost way to >> transition from the Q Cable to the TC-ER. I'm pretty sure the Enphase field >> wireable connectors are not compatible with TC-ER, but I could be wrong. >> >> >> >> >> >> On Wed, Oct 7, 2020, 6:37 PM Bryan Norkunas <[email protected]> wrote: >> >> 12/2 flat tray cable? >> >> >> >> *Bryan Norkunas* >> >> *PV-Cables Inc. * >> >> *989 Milton Ave Ste 1D* >> >> *Ferndale CA 95536* >> >> (707) 923-3000 office >> >> www.pv-cables.com >> <https://mailtrack.io/trace/link/edc9311580c6e29972282323a971013d91c53054?url=http%3A%2F%2Fwww.pv-cables.com%2F&userId=1613865&signature=32b8197d24331f68> >> >> >> >> >> >> >> >> *From:* RE-wrenches [mailto:[email protected]] *On >> Behalf Of *William Miller >> *Sent:* Wednesday, October 7, 2020 9:42 AM >> *To:* RE-wrenches >> *Subject:* Re: [RE-wrenches] Enphase Raw Q Cable >> >> >> >> Put your junction boxes closer to the microinverters? >> >> >> >> Miller Solar >> >> 17395 Oak Road, Atascadero, CA 93422 >> >> 805-438-5600 >> >> www.millersolar.com >> <https://mailtrack.io/trace/link/19d0fe06a61e04488e62434bc2601a0ebc632743?url=http%3A%2F%2Fwww.millersolar.com%2F&userId=1613865&signature=622e773373a5faca> >> >> CA Lic. 773985 >> >> >> >> >> >> *From:* RE-wrenches [mailto:[email protected]] *On >> Behalf Of *Jason Szumlanski >> *Sent:* Tuesday, October 6, 2020 9:08 AM >> *To:* RE-wrenches >> *Subject:* [RE-wrenches] Enphase Raw Q Cable >> >> >> >> Has anybody come up with a good wiring alternative to Raw Q Cable when >> making long runs along rails from a string to a junction box? >> >> >> >> We are running into supply problems through distribution. I'm looking for >> something that might be more readily available. >> >> >> >> Jason Szumlanski >> >> Florida Solar Design Group >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> <https://mailtrack.io/trace/link/12818bfdf1d675683a26bb4d1eaae88899934dcc?url=http%3A%2F%2Flists.re-wrenches.org%2Foptions.cgi%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=58e8fc159f54056f> >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/[email protected]/ >> <https://mailtrack.io/trace/link/f22f4ead536e65f517875dbc0ad45801ad9cf0a6?url=https%3A%2F%2Fwww.mail-archive.com%2Fre-wrenches%40lists.re-wrenches.org%2F&userId=1613865&signature=b303454bc005f8b6> >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> <https://mailtrack.io/trace/link/e670dc8e66558afa090d2b4be0ef4ea82f5913f6?url=http%3A%2F%2Flists.re-wrenches.org%2Fpipermail%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=6b662f43f6ec0cfc> >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> <https://mailtrack.io/trace/link/efd33e1b83e75868ba91b16b258ac2dcf63b8e5b?url=http%3A%2F%2Fwww.re-wrenches.org%2Fetiquette.htm&userId=1613865&signature=d8c593cdfe237715> >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> <https://mailtrack.io/trace/link/ecfc4ebc9ccae64ae2deb218d7b239bc696c239c?url=http%3A%2F%2Fwww.members.re-wrenches.org&userId=1613865&signature=f790bbf70f35a6d8> >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> <https://mailtrack.io/trace/link/dab8b88a850f27318903da5e4aae8c6e0bbb6df1?url=http%3A%2F%2Flists.re-wrenches.org%2Foptions.cgi%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=b4be279bc8c56c9e> >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/[email protected]/ >> <https://mailtrack.io/trace/link/c3124efd3ef16bec6e5a860d45f6c824fbc24af4?url=https%3A%2F%2Fwww.mail-archive.com%2Fre-wrenches%40lists.re-wrenches.org%2F&userId=1613865&signature=eefbc735e5a01999> >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> <https://mailtrack.io/trace/link/99cd86ae9925edb7421c5be1105b97303aa08f4d?url=http%3A%2F%2Flists.re-wrenches.org%2Fpipermail%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=ae64c6837155488e> >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> <https://mailtrack.io/trace/link/b4f8d6c2a8b536575d19888cf56681481b042512?url=http%3A%2F%2Fwww.re-wrenches.org%2Fetiquette.htm&userId=1613865&signature=104ad3e56524cca7> >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> <https://mailtrack.io/trace/link/d809bdd07757d7b1d7509f96a33cf9c2bcdafe21?url=http%3A%2F%2Fwww.members.re-wrenches.org&userId=1613865&signature=8f46a07eda7c887d> >> >> _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
