Hi Ben,

Dave had to go on a service call up into the high county. No cell ! I
expect him back before dark. Probably will get back in the AM

Thanks, Ingrid

Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail [email protected]
text 209 813 0060

On Fri, 29 Jan 2021 13:32:30 -0800, Dave Angelini Offgrid Solar
<[email protected]> wrote:
> Hi Sly,
> 
>  The small part of the industry ( Offgrid ) mostly uses ground mounting
> and is not using MLSD. On some new offgrid homes I use rapid shutdown at
> MPPT level to get the permit if the AHJ can't be reasoned with. The
> Schneider rapid shutdown has a nice 600 vdc disconnect in it,  that is
> useful later if the homeowner decides to abandon the extra electronics
that
> can affect reliability.
> 
> We also protect the area under and near the modules to guard against a 
> rare defect from causing a wildfire.
> 
> I would like to hear what Outback is doing for this also from you guys
> please?  FRIDAY !!!
> 
> 
> Dave Angelini Offgrid Solar
> "we go where powerlines don't"
> http://members.sti.net/offgridsolar/
> e-mail [email protected]
> text 209 813 0060
> 
> On Fri, 29 Jan 2021 14:09:48 -0500, [email protected] wrote:
>> So far the module level shutdown requirements have been a real blow to
> our
>> industry. The reliability and cost from a maintenance and installation
>> standpoint has been very hit or miss so far. It feels like this
> requirement
>> was rolled out far too quickly without enough forethought to its impact
> on
>> the industry. We are constantly going out and fixing problems with mlsd
>> installed by other contractors. Thankfully the problems have nothing to
> do
>> with the quality of the installations. The problems are almost all due
> to
>> premature failure of the products or some inherent defect in them. This
> is
>> a serious issue costing the industry time and resources and making our
>> installers less safe. It just doesn’t really accomplish the intended
> goal
>> of the requirement. 
>> I’m curious how other wrenches are dealing with this issue. I recently
>> became aware of fixMLSD.com which appears to be focused on bringing a
> more
>> sensible approach to this requirement. 
>> 
>> Your thoughts are appreciated,
>> Sky Sims
>> Https://EcologicalSystems.biz
>> “Just An Old Wrench”
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: [email protected]
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> There are two list archives for searching. When one doesn't work, try
> the
>> other:
>> https://www.mail-archive.com/[email protected]/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: [email protected]
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try
the
> other:
> https://www.mail-archive.com/[email protected]/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to