If you don't need a grid connection at other times, I have implemented a solution using a Raspberry Pi, reading the data using XML from the Mate3 and parsing the values, and opening and closing a relay which control a contactor. I used SOC as my guide, that's probably the most important value, but you can also use voltage. If you know a little programming it is easy to implement. Let me know if you want any guidance.
On Thu, Feb 4, 2021 at 1:58 PM Jerry Shafer <jerrysgarag...@gmail.com> wrote: > Wrenches, Kirpal > I use the grid connection in the mate, grid use, and set the inverter to > connect only at that time, its far from. Ideal but seems to do the job. I > have tried the HBX but its inverse to what l wanted it to do, we are > fortunate to have a Outback guy on this forum and he may chime in also > Jerry > > On Thu, Feb 4, 2021, 8:22 AM Kirpal <solarwo...@gmail.com> wrote: > >> Hi Folks.... >> We have a scenario where we would like to control when our system sells >> power back to the grid. Basically, we only want to sell back while the sun >> is shining. We would like to stop selling based on programmed clock >> settings. I know in HBX mode we can control when we buy from the grid, >> wondering if anyone knows how to control if and when we sell to the grid, >> separate from voltage set points. In this situation we basically don't >> want to sell hydro power back at night. >> We can create our own relay controls to prevent if we need to, but hoping >> someone has a Mate controller based programming solution. I can't seem to >> find it and at first glance Outback tech support didn't have an answer...It >> was a new tech support guy I spoke with and he was going to do some >> research and get back to me. >> 100 Thanks! >> >> Sunny Regards, >> Kirpal Khalsa >> Oregon LRT#25 >> Oregon Solarworks LLC >> www.oregonsolarworks.com >> 541-299-0402 >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > -- Chris Mason Solar systems designer Generac Generators Industrial technician Comet Systems Ltd DBA Comet Solar Anguilla Cell 264.235.5670 WhatsApp 264.235.5670 Skype: netconcepts www.cometsolar.com <http://www.cometenergysystems.com/>
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org