Have any wrenches out there installed a Schneider XW Pro multi-inverter
setup with three inverters per the multi-inverter design guide
<https://solar.schneider-electric.com/download/xw-pro-iec-technical-publications/?ind=13539&filename=XW-Pro-Multi-unit-Design-Guide-990-91373.pdf&wpdmdl=10327&refresh=6024628387f561612997251>?
I've got one installed per the manual and am having a devil of a time
getting it to stay latched onto the generator with the external
contactor. Can't even get it to stay latched on with no load. All advise
on getting this to work is appreciated.
Kent Osterberg
Blue Mountain Solar
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
