I use some older software from Grundfos called WinCAPS v 7.8 for pump sizing. It works well. I am only focused on the SQFlex systems, so have not used the other modules but believe it will do the calculations you wish. You may be able to find that software online to download. If not, I could try and locate the original installation CD or run the sizing for you.
Kevin Pegg EA Energy Alternatives Ltd. 37471 Hwy 16 E Telkwa, BC V0J 2X2 250-846-9888 Http://www.EnergyAlternatives.ca -----Original Message----- From: RE-wrenches [mailto:[email protected]] On Behalf Of frenergy Sent: March-26-21 12:39 PM To: [email protected] Subject: [RE-wrenches] Deep well pumping Hey Folks, Why am I having such a difficult time finding a Grundfos distributor that can help me with a pump design for a new well? Their website seems clunky for getting info Static at 25 feet, drilled to 340 feet to hit 30+ GPM. We would like to have 25 GPM at 40 psi, pump set at 300 ft, dynamic water level is 175 feet. Does Grundfos have a pump for this application? Thanks Bill Feather River Solar Electric Bill Battagin, Owner 4291 Nelson St. Taylorsville, CA 95983 530.284.7849 CA Lic 874049 www.frenergy.net -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
