Esteemed Wrenches, Working on a system with 4 XW+ inverters. Using a
conext config tool I used a few years ago. I am trying to set the AC
output voltages on the inverters so they were within .5 VAC per the
manual. When you try to configure the AC output It gives you a warning
and requires a password. I have tried the password that worked with the
Gateway and guessed at many others but no luck. I did a word search for
"password" in all the schneider O & M manuals that had anything remotely
to do with inverters, config tool, multi inverter systems etc.
Anyone know the secret handshake? If I made one years ago and no longer
have it does anyone know how I can reset it?
Also wondering if anyone is using the new combox successfully with XW+
inverters? Looks like Schneider discontinued the XW+ line as well as
the original combox. I've heard good things about the combox and would
like to try out the new version if it's compatible.
Thanks in advance, I appreciate it!
Greg Egan
Remote Power Inc.
Fairbanks, AK
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org