You need to confirm that the gennyhas acceptable voltage and freq,the inverter may protecting itself Jerry
On Thu, Jan 13, 2022, 4:38 AM Mac Lewis <[email protected]> wrote: > Good Morning Wrenches, > > I have an Outback Radian 8048 site that is acting up. > > This only happens when the generator is automatically started. > It will start the generator and warm it up normally and then connect and > start charging as it should. After about 30 seconds to 1 minute it will > drop the AC input, and put the generator in cool down mode and the charger > will be disabled. It will then continue to run the generator until you > turn it off manually, presumably because it hasn't reached the stop > trigger. > > This system will charge normally when the generator is manually started. > The firmware on the Mate3s is up to date. > > Any ideas? > > Thanks in advance > > -- > > > > Mac Lewis > > *"Yo solo sé que no sé nada." -Sócrates* > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
